...

SANITARY HARDWARE FITTER Syllabus for the trade of Apprenticeship Training Scheme

by user

on
Category: Documents
1

views

Report

Comments

Transcript

SANITARY HARDWARE FITTER Syllabus for the trade of Apprenticeship Training Scheme
Syllabus
for the trade of
SANITARY HARDWARE FITTER
Under
Apprenticeship Training Scheme
DESIGNED IN
2010
Government of India
Ministry of Labour & Employment (D.G.E.& T)
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
EN-Block, Sector – V, Salt Lake City,
Kolkata- 700 091
1
List of members attended the Trade Committee Meeting for designing the course curriculum under
Apprenticeship Training Scheme (ATS) on “ Sanitary Hardware Fitter” held on 08.04.2010 and
09.04.2010 at Industrial Training Institute, Sarkhej, Ahmedabad, Gujarat.
Shri S.D. Lahiri Director C.S.T.A.R.I. Kolkata
Sr.No
Name & Designation
Organization
Remarks
1
Bhavani Group of Industries, Sarkej
Chairman
Janatics India Pvt. Ltd. Ahmedabad
Jekobs India pvt. Ltd., Ahmedabad
Jekobs India pvt. Ltd., Ahmedabad
Janatics India Pvt. Ltd., Ahmedabad
Member
Member
Member
Member
Varia Engg. works Pvt. Ltd., Bavla. A’bad
Siddhi Industries, Ahmedabad.
Member
Member
8
Mukeshbhai Patel, Managing
Director,
IMC Chairman, I.T.I. Sarkej
Anup Bhavsar, Sr. Engineer
Dharmendra, Engineer (Civil)
K.P. Patel, Engineer (Civil)
Amish Bhavsar,
Bussiness Dev. Manager
Persottam B. Varia, Engineer
Imtiyaz Kureshi,
I.C. Engineer
Maulik Shelat, Director
Member
9
Kamlesh Prajapati, Manager
Technology Exechange Service Pvt.Ltd.
Ahmedabad
Sun Inst. Pvt, Ltd. A’bad
10
Ahmedabad Ind.Corporation A’bad
Member
11
Limbachiya Jatin, Officer in
Charge
Bhavik Patel, Engineer
AIA Engg. Ltd. Changodar A’bad
Member
12
R.D.Mehta, Lecturer
Member
13
Dipesh Makwana, Lecturer
Govt.Polytechnic For Girls,
Navrangpura, Ahmedabad.
L.D.collage of Engg. Ahmedabad
14
15
Ganpat University, Mehsana
Regional Deputy Director(Trg.) Rajkot
Member
Member
16
17
Divyangna Gandhi, Lecturer
S.A.Pandav
Regional Deputi Director(Trg.)
G.N.Parekh, R.D.D., Ahmedabad
A.C.Muliyana, Principal Class-I
R.D.D. (Training), Ahmedabad
ITI, Sarkhej
Member
Member
18
N.R.Oza, Principal Class-II
ITI, Sarkhej
Member
19
SS Charan, Asst. Apprentice
Advisor
IS Patel, Sr. Instructor
D Dey, Asstt. Director of
Training
LK Mukherjee, Deputy Director
ITI Rajkot
Member
ITI, Sarkhej
A.T.I. Mumbai
Member
Member
C.S.T.A.R.I., Kolkata
Member
2
3
4
5
6
7
20
21
22
2
Member
Member
General
Information.
1. Name of the Trade
:- Sanitary Hardware Fitter
2. N.C.O. Code No.
:- 7233.10
3. Entry qualification :-
:- Passed in 8th Class Examination from recognized
school or its equivalent.
4. Duration of Craftsman Training
:- Six month
5. Duration of Apprenticeship Training
:- One year including six month in Craftsman training.
6. Rebate of ITI Passed Trainees
: - Six month for ITI/ITC passed out trainees
in the trade of Sanitary Hardware Fitter
7. Ratio of Apprentice to Workers
:-
1: 4
3
SYLLABUS FOR THE TRADE OF
“ Sanitary Hardware Fitter”
UNDER APPRENTICESHIP TRAINING SCHEME
Duration of Training : One Year
First six month: - During first six month the apprentices will undergo the syllabus same as CTS in the
trade of Sanitary Hardware Fitter.
Next six month: - The apprentice will undergo shop floor training in the related Establishment /Industry
as per the under mentioned syllabus
Trade : Sanitary Hardware Fitter
List of Operations :
(1) Use and Care of the masons hand tools and equipments
(2) Safety precautions to be observed in the shop floor. Occupational health hazards,
environmental pollution related to the trade- its causes, consequences, mitigation and control.
(3) Demonstration on Brick laying setting, Construction of gully traps inspection chamber etc.
(4) Demonstration on Construction of inspection chamber
(5) Use & Care of the Plumbers Hand Tools & Equipments
(6) Demonstration on Cutting & Threading of pipes.
(7) Repairing of tabs valves, cistern etc.
(8) Demonstration on Fixing of Floor tabs , Waste Pipe , Soil Pipe , vent Pipe etc.
(9) Cutting & Shipping of PVC / HDPE pipes to sizes and fixing of PVC / HDPE fitting & joining.
(10) Demonstration on Installing / Maintenance Indian style , European style water closet.
(11) Installing / Maintenance a urinal with automatic flushing cistern.
(12) Installing / Maintenance washbasin,sink,bath tub with all necessary connection
4
(13) Installing / Maintenance WC.range urinal flushing arrangement, west outlet Construction /
Maintenance septic tank, soak pit main hole, Main pipe etc.
(14) Cleaning of sanitary fittings.
RELATED INSTRUCTIONS
1. Importance of the trade in the development of industrial economy of the country.
2. Various Method of construction of inspection chamber.
3. Care and use of tools, materials used in plumbing (Sanitary hardware work).
4. Description of traps. Types of traps. Method of testing soil pipe and waste pipe.
5. PVC/HDPE description of ISI specification of pipe. Properties and uses.
Method of cutting and preparation of joints. Layout of PVC/HDPE pipes.
6. Types of urinal, description of flashing, devices, tripper automatic tank.
7. Description commercial and bathroom faucet fittings. Brace and aluminum fittings
procedure.
8. Corrosion-its causes and remedies prevention of corrosion.
Corrosion due to electrolytic action.
The effect of water and frost on materials.
……………….
5
Fly UP