...

Dr. Venkataramana Runkana – Pune ( TRDDC), Process Engineering

by user

on
Category:

society

7

views

Report

Comments

Transcript

Dr. Venkataramana Runkana – Pune ( TRDDC), Process Engineering
Dr. Venkataramana Runkana
Principal Scientist, TCS Innovations Lab – Pune ( TRDDC), Process Engineering
Publications
Book Chapters
1. Ashok Khanna, Saptarishi Dey, Venkataramana Runkana, Shantanu Maheshwari, “Personalized Artificial
Pancreas Device Systems”. In: Philippe Cousin (Ed.), IoT Success Stories, Series3, Internet of Things
European Research Cluster (2015).
2. Somasundaran P., and V. Runkana, “Interactions of Polyelectrolytes with Particulate Matter in Colloidal
Suspensions,” In: Z. Amjad (Ed.), The Science and Technology of Industrial Water Treatment, CRC Press,
Taylor and Francis (2010).
3. Somasundaran, P., and V. Runkana, “Aggregation of Colloids: Recent Developments in Population Balance
Modeling,” In: D. Platikanov and D. Exerowa (Eds.), Highlights in Colloid Science, WILEY-VCH Verlag GmbH
& Co. KGaA, Weinheim (2008)
4. Gautham B.P., Pradip, S. Sahay, A.K., Singh, and R. Venkataramana, “Model Collaboration,” in Research by
Design: Innovation and TCS, Kanavi, S. (Ed.) pp. 161-171, Rupa & Co., New Delhi (2007).
5. Venkataramana Runkana, and P. Somasundaran, “Mathematical Modeling of Coagulation and Flocculation of
Colloidal Suspensions Incorporating the Influence of Surface Forces,” pp. 91-118, In: T.I. Tadros (Ed.),
Colloid Stability and Application in Pharmacy, Colloid and Interface Science Series, Vol. 3, Wiley-VCH Verlag
GmbH & Co. (2007)
6. Somasundaran, P., Venkataramana Runkana, Kapur, P.C., “Flocculation and dispersion of colloidal
suspensions by polymers and surfactants: experimental and modeling studies,” pp. 767-803, In:
Stechemesser, H.J., Dobias, B. (Eds.), Coagulation and Flocculation, 2nd ed. Marcel Dekker, New York
(2005)
Journal Articles
1. Venkataramana Runkana, "Model-Based Optimization of Industrial Gas-Solid Reactors," KONA Powder and
Particle Journal, No. 32,115–130 (2015)
2. Venkata Sudheendra Buddhiraju and Venkataramana Runkana, “Simulation of nanoparticle synthesis in an
aerosol flame reactor using a coupled flame dynamics–monodisperse population balance model,” J. Aerosol
Sci., 43, 1–13 (2012) (One of the Most Downloaded Articles during Nov 2011- Jan 2012)
3. Nagaravi Kumar Varma Nadimpalli, Venkata Sudheendra Buddhiraju, Venkataramana Runkana, "Modeling
and simulation of carbon black synthesis in an aerosol flame reactor," Advanced Powder Technology, 22,
141–149 (2011).
4. Venkataramana Runkana, P. V. Natekar, V. Bandla, and G. Pothal, "Mathematical Modelling of Sponge Iron
Production in a Rotary Kiln," SteelTech, Vol.5, 9-17 (October 2010)
5. Venkataramana Runkana, P. V. Natekar, V. Bandla, G. Pothal, A. Chatterjee, "Optimization of Sponge Iron
Production in a Rotary Kiln through Modelling and Simulation," Steelexpress, pp. 56-59 (July 2010)
6. Muralidharan, G. and V. Runkana, “Rheological Modeling of Spherical Polymeric Gels and Dispersions
Incorporating the Influence of Particle Size Distribution and Surface Forces,” Ind. Eng. Chem. Res., Vol. 48,
8805–8811 (2009).
7. S. Majumder, P. V. Natekar, and V. Runkana, “Virtual Indurator: A Tool for Simulation of Induration of Wet
Iron Ore Pellets on a Moving Grate,” Computers and Chemical Engineering, Vol. 33, 1141-1152 (2009).
8. Kishalay Mitra, S Majumder, V. Runkana, “Multi-objective Pareto Optimization of an Industrial Straight Grate
Iron Ore Induration Process Using Evolutionary Algorithms,” Materials and Manufacturing Processes, Vol. 24,
331-342 (2009)
9. Venkataramana Runkana, P. Somasundaran, and P.C. Kapur, “A population balance model for flocculation of
colloidal suspensions by polymer bridging,” Chemical Engineering Science Vol.61, 182-191 (2006)
10. Somasundaran, P., and Venkataramana Runkana, “Investigation of the flocculation of colloidal suspensions
by controlling adsorbed layer microstructure and population balance modeling,” Chemical Engineering
Research and Design, Vol.83, 905-914 (2005)
11. Venkataramana Runkana, P. Somasundaran, and P.C. Kapur, “Reaction-limited aggregation in presence of
short-range structural forces,” AIChE Journal, Vol.51, 1233-1245 (2005)
12. Venkataramana Runkana, P. Somasundaran, and P.C. Kapur, “Mathematical modeling of polymer-induced
flocculation by charge neutralization,” Journal of Colloid and Interface Science, Vol.270, 347-358 (2004)
13. Kapur, P.C., and Venkataramana Runkana, “Balling and granulation kinetics revisited,” Int. J. of Mineral
Processing, Vol.72, 417-427 (2003)
14. Somasundaran, P., and Venkataramana Runkana, “Modeling flocculation of colloidal mineral suspensions
using population balances,” Int. J. of Mineral Processing, Vol.72, 33-55 (2003) (One of the Most Requested
Articles during Oct 2003 – Sept 2004)
15. Venkataramana Runkana, P.C.Kapur, and S.S.Gupta, "Modelling of granulation by a two-stage auto-layering
mechanism in continuous drums," Chemical Engineering Science, Vol.57, 1685-1693 (2002)
16. Gupta, S. S., and Venkataramana Runkana, “Mathematical model of air flow during iron ore sintering
process,” Iron and Steelmaker, Vol.27, 35-41, (December 2000)
17. Somasundaran, P., and Venkataramana Runkana, “Selective Flocculation of Fines,” Transactions of
Nonferrous Metals Society of China, Vol.10, pp. 8-11 (2000)
18. Venkataramana Runkana, Gupta, S.S. and Kapur, P.C., “A combined model for granule size distribution and
cold bed permeability in the wet stage of iron ore sintering process”, Int. J. of Mineral Processing, Vol.57, 4358, (1999).
19. Venkataramana Runkana, S.S.Gupta, P.C.Kapur, and N.Ramachandran, “Mathematical modeling and
simulation of the iron ore sintering process,” Tata Search, 25-30 (1998) (Second Best Paper Award from
Tata Search for 1998)
20. Venkataramana Runkana, S.S.Gupta, P.C.Kapur, and N.Ramachandran, “Modeling of iron ore sinter feed
granulation,” Tata Search, 66-72 (1997) (Second Best Paper Award from Tata Search for 1997)
Conference Proceedings/Presentations
1. Abhishek Baikadi, Venkataramana Runkana, and Sivakumar Subramanian, “Operability Analysis of Direct
Reduction of Iron Ore by Coal in an Industrial Rotary Kiln,” 4th International Conference on Advances in
Control and Optimization of Dynamical Systems, February 1-5, 2016, Tiruchirappalli, India.
2. Aditya Pareek, Shantanu Maheshwari, and Venkataramana Runkana, “Mathematical modeling of the swelling
behaviour of polymer hydrogels,” CHEMCON 2015, Dec 27-30, 2015, Guwahati, India.
3. Aniruddha Panda, Kartik Saraf, and Venkataramana Runkana, “Numerical Simulation of a Carbon Black
Furnace Reactor,” CHEMCON 2015, Dec 27-30, 2015, Guwahati, India.
4. Vinay Patel, Aditya Pareek, Shantanu Maheshwari and Venkataramana Runkana, “Physiology-based
Pharmacokinetics Model for Glucose-Insulin System,” 43rd Annual Conference of Research Society for The
Study of Diabetes in India, 30 Oct-1 Nov 2015, Lucknow, India.
5. Nagaravi Kumar Varma Nadimpalli, Rajdip Bandyopadhyaya, and Venkataramana Runkana, “Modeling and
Simulation of Hydrothermal Synthesis of Ceria Nanoparticles,” The 6th Asian Particle Technology Symposium
(APT 2015), September 15-18, 2015, Seoul, South Korea.
6. Rohan Pandya, Kumar Akash, and Venkataramana Runkana, “Modeling of straight jet dynamics in
electrospinning of polymer nanofibers,” COMSOL 2015, October 29-30, 2015, Pune, India.
7. Aditya Pareek, Tanmay Mathur and Venkataramana Runkana, “Mathematical Modeling of Glucose
Responsive Hydrogels,” COMSOL 2015, October 29-30, 2015, Pune, India.
8. Aditya Pareek, Shantanu Maheshwari and Venkataramana Runkana, “Mathematical Modeling as a Tool to
Design Biodegradable Polymer based Drug Delivery Systems,” CHEMCON 2014, Chandigarh, Dec 27-30,
2014.
9. Nagaravi Kumar Varma Nadimpalli and Venkataramana Runkana, “Model-based design and scale-up of an
aerosol flame reactor for nanoparticle synthesis,” NMD-ATM 2014, Pune, Nov 12-15, 2014.
10. Aditya Pareek, Shantanu Maheshwari and Venkataramana Runkana, “Modeling and Simulation of Drug
Release through Polymer Matrices,” COMSOL 2014, Bangalore, Nov 13-14, 2014.
11. Venkataramana Runkana, Venkata Sudheendra Buddhiraju, and Nagaravi Kumar Varma Nadimpalli,
“Modeling and Simulation of Nanoparticle Synthesis in an Electrically Heated Furnace Reactor,” 7 th World
Congress of Particle Technology (WCPT 2014), Beijing, China, May 19-22, 2014.
12. Venkataramana Runkana & Shantanu Maheshwari, “High energy milling in a planetary ball mill: discrete
element and population balance modelling,” 27th International Mineral Processing Congress (IMPC 2014),
October 20-24, 2014.
13. Venkataramana Runkana, Shantanu Maheshwari, Sivakumar Cherlo and Ramasubba Reddy Thavva,
“Design of Polymer Hydrogels through Modeling and Optimization for Controlled Drug Release,” 12th USJapan Symposium on Drug Delivery Systems, Lahaina, USA, Dec 16-20, 2013
14. Shantanu Maheshwari, Anish Gupta, Venkataramana Runkana, “Modeling and Simulation of Media Motion
and Grinding Kinetics in a Ball Mill,” CHEMCON 2013, 66th Annual Session of Indian Institute of Chemical
Engineers, Mumbai, 27-30 December 2013
15. Venkataramana Runkana, Shantanu Maheshwari, Rahul Konnur, Ashok Kumar, Vipul M. Koranne, Tapas
Chakraborty, and Arunkumar C., “Process Data Analytics and Optimization of Iron Ore Sintering,” NMD-ATM,
Annual Technical Meeting of the Indian Institute of Metals, Varanasi, Nov 12-15, 2013.
16. Shantanu Maheshwari, Sivakumar Cherlo, Rama Subba Reddy Thavva & Venkataramana Runkana,
“Modeling and simulation of drug release through polymer hydrogels,” COMSOL Conference (COMSOL
2013), Bangalore, October 17-18, 2013.
17. Viswanadh Bandla and Venkataramana Runkana, “Modeling of Nanoparticle Synthesis in Water-in-Oil
Microemulsions,” Proceedings of the 5th International Conference on Population Balance Modeling (PBM
2013), Bangalore, India, September 11-13, 2013.
18. Nagaravi Kumar Varma Nadimpalli and Venkataramana Runkana, “Design of an Aerosol Flame Reactor for
Nanoparticle Synthesis,” Proceedings of the 5th International Conference on Population Balance Modeling
(PBM 2013), Bangalore, India, September 11-13, 2013.
19. Marcos Vinicios S. Cavalcante, Rodrigo Cesar de Miranda, Bruna Andrade, Venkoba Rao, B., Sushanta
Majumder and Venkataramana Runkana, “Advanced process control of an industrial iron ore pellet induration
process,” Paper No. 785, Proceedings of the XXVI International Mineral Processing Congress (IMPC2012),
Sept 24-28, 2012, New Delhi, India.
20. Venkata Sudheendra Buddhiraju, Shantanu Maheshwari, Beena Rai, Michael Moys and Venkataramana
Runkana, “Modeling and Simulation of Ultra-fine Grinding of Alumina in a Planetary Ball Mill,” Paper No. 787,
Proceedings of the XXVI International Mineral Processing Congress (IMPC2012), Sept 24-28, 2012, New
Delhi, India.
21. Sushanta Majumder, Viral J. Desai, Arunprasath, J., Venkataramana Runkana, A. S. Prasad, M.
Ravindranath, and Prakhar Sharma, “Model-based On-line Optimization of Iron Ore Pellet Induration on a
Moving Grate Furnace,” Paper No. 5, Proceedings of the XXVI International Mineral Processing Congress
(IMPC2012), Sept 24-28, 2012, New Delhi, India.
22. Venkataramana Runkana (Invited Speaker), “Optimization and Control of Industrial Particulate Processing
Operations through Predictive Data Analytics,” 5th Asian Particle Technology Symposium (APT2012), July 25, 2012, Singapore.
23. Ramasubbareddy Thavva and Venkataramana Runkana, “Modelling of Biodegradable Polymer-based
Medical Implants,” APA International Congress on Advances in Human Healthcare Systems (Healthcare India
2012), February 20-23, 2012, New Delhi, India.
24. Marcos Vinicios S. Cavalcante, Rodrigo Cesar de Miranda, Bruna Andrade, Venkoba Rao, B., Sushanta
Majumder and Venkataramana Runkana, “Gains from the implementation of Advanced Process Control to
pelletizing furnace,” 6th International Congress on the Science and Technology of Ironmaking, February
2012.
25. Nagaravi Kumar Varma Nadimpalli and Venkataramana Runkana, “Scale- up of an aerosol flame reactor for
synthesis of nanostructured particles,” International Conference on Nanoscience and Technology (ICONSAT
2012), January 20-23, 2012, Hyderabad, India.
26. Venkata Sudheendra Buddhiraju, Michael H. Moys, Venkataramana Runkana, “Modeling and Simulation of
Media Motion in a Planetary Ball Mill,” EDEM User Meet, 6 December 2011, Bangalore, India.
27. Venkata Sudheendra Buddhiraju, Michael H. Moys, Venkataramana Runkana, “Modeling and Simulation of
Media Motion in a Planetary Ball Mill,” XII International Conference on Mineral Processing Technology (MPT2011), 20-22 October 2011, Udaipur, India.
28. Marcos Vinicios S. Cavalcante, Rodrigo Cesar de Miranda, Bruna Andrade, Venkoba Rao, B., Sushanta
Majumder and Venkataramana Runkana, “Soft Sensor para Controle Avançado de Processo do Forno de
Pelotização,” 41º Seminário de Redução de Minério de Ferro e Matérias-Primas & 12º Simpósio Brasileiro de
Minério de Ferro, September 2011.
29. Venkataramana Runkana, S. Majumder, V. Desai, and J. Arunprasath "Soft-sensing and On-line Optimization
of Induration of Wet Iron Ore Pellets on a Moving Grate Furnace", 40th Seminar on Reduction of Iron Ore and
Raw Materials and 11th Brazilian Symposium on Iron Ore, Belo Horizonte, Brazil, Sept 20-22, 2010.
30. Venkataramana Runkana, P. V. Natekar, V. Bandla, G. Pothal, A. Chatterjee, "Modelling and Optimisation of
Direct Reduction of Iron Ore by Coal in a Rotary Kiln," International Mineral Processing Congress (IMPC
2010), Brisbane, Australia, Sept 6-10, 2010
31. Venkataramana Runkana, S. Majumder, V. Desai, and J. Arunprasath, "On-line Optimization of an Industrial
Gas-Solid Reactor," ChEmference 2010, Indian Institute of Technology, Kanpur, July 13-14, 2010.
32. Venkataramana Runkana, Venkata Sudheendra Buddhiraju and Nagaravi Kumarvarma Nadimpalli,
"Production of Nanomaterials: Scale-up & Process Optimization," at Nanotech Conclave 2010 at New Delhi,
April 14-15, 2010.
33. G. Muralidharan, A. Jain and V. Runkana, “Modeling of Drug Release from Swelling Controlled Release
Systems,” The Fourth Asian Particle Symposium (APT2009), New Delhi, September 14-16, 2009.
34. Nagaravi Kumar Varma Nadimpalli, Venkata Sudheendra Buddhiraju and Venkataramana Runkana, “A
Coupled Flame Dynamics - Population Balance Model for Carbon Black Synthesis in an Aerosol Flame
Reactor,” The Fourth Asian Particle Symposium (APT2009), New Delhi, September 14-16, 2009.
35. Muralidharan, G., and V. Runkana, “Prediction of Viscosity of Polymer Gel Dispersions,” Presented at
CHEMCON2008, Chandigarh, India (27-30 Dec 2008).
36. Buddhiraju, V. S., and V. Runkana, “Simulation of Nanoparticle Synthesis in a Flame Aerosol Reactor using a
Coupled Population Balance-Flame Dynamics Model,” Presented at CHEMCON2008, Chandigarh, India (2730 Dec 2008).
37. Mitra, K., S. Majumder, and V. Runkana, “Multi-objective Pareto Optimization of an Industrial Straight Grate
Iron Ore Induration Process Using an Evolutionary Algorithm,” WSC 2008 Online World Conference on Soft
Computing in Industrial Applications (10-21 Nov 2008).
38. Runkana, V., and G. Muralidharan, “Polymer Gels for Coatings, Drug Delivery and Consumer Products,”
Poster presented at 2nd International Conference on Multi-scale Structures and Dynamics of Complex
Systems: Processes and Forces for Creation of Designer Materials with Multi-Scale Structures, Bangalore, 45 September 2008.
39. Majumder, S., P. V. Natekar, and V. Runkana, “Virtual Indurator: A Simulator for Induration of Iron Ore Pellets
on a Moving Grate,” Proceedings of International Seminar on Mineral Processing Technology (MPT-2008),
Trivandrum, 22-24 April 2008.
40. Runkana, V., Natekar, P. V., Bandla, V., Pothal, G., Rath, S. K., Jena, S., Ninan, T. P. and Chatterjee, A.
“Development of a Simulator for Direct Reduction of Iron Ore by Coal in a Rotary Kiln,” Presented at Annual
Technical Meeting of Indian Institute of Metals (ATM-NMD 2007), Mumbai, India, November 2007.
41. P. Somasundaran, P. C. Kapur, and Venkataramana Runkana, “Population Balance Modeling of Flocculation
of Mineral Suspensions by Polymers,” Paper No. F159, Presented at Intl. Mineral Processing Conference
(IMPC-2006), Istanbul, Turkey (September 3-9, 2006)
42. Viswanadh Bandla and Venkataramana Runkana, “A Population Balance Model for Nanoparticle Synthesis in
Water-in-Oil Microemulsions,” Abstract No. B334, Poster presented at Eighth International Conference on
Nanostructured Materials (Nano-2006), Bangalore, India (August 20-25, 2006).
43. Somasundaran, P., Venkataramana Runkana and P. C. Kapur, “A Population Balance Model for Flocculation
of Colloidal Suspensions Incorporating the Influence of Surface Forces,” (Paper No. 35244, CD-ROM
Proceedings), Presented at 5th World Congress on Particle Technology (WCPT5-2006), Orlando, Florida,
USA (April 23-27, 2006).
44. Venkataramana Runkana, "Population Balance Modeling of Nanoparticle Synthesis in Aerosol Flame
Reactors," Proceedings of the 4th Asian Aerosol Conference, AAC 2005/Session I-A/I-14, pp.10-11, Mumbai,
India (Dec 13-16, 2005).
45. Somasundaran, P., and Venkataramana Runkana, “Investigation of the flocculation of colloidal suspensions
by controlling adsorbed layer microstructure and population balance modeling,” (Paper No. O32-004, CDROM Proceedings), Presented at 7th World Congress of Chemical Engineering (WCCE 2005), Glasgow, UK
(July 10-14, 2005).
46. Venkataramana Runkana, P.C.Kapur, and P.Somasundaran, “Elucidation of the role of surface forces in
coagulation and flocculation of colloidal suspensions by population balance modeling,” Presented at the Joint
IIChE-AIChE conference on Chemical Engineering in a Global Environment, Mumbai, India (December 27-30,
2004).
47. Venkataramana Runkana, P. Somasundaran, and P.C. Kapur, “A population balance model for flocculation of
colloidal suspensions by polymer bridging,” Presented at 2nd International Conference on Population Balance
Modeling – PBM 2004, Valencia, Spain (May 5-7, 2004) (Paper No. 3b-1, CD-ROM Proceedings).
48. Venkataramana Runkana, P.C.Kapur, and P.Somasundaran, “Modeling flocculation of colloidal suspensions
using population balances,” Presented at Indian Chemical Engineering Congress – CHEMCON 2003,
Bhubaneswar (December 2003) (Paper No. CHM-353, CD-ROM Proceedings).
49. Venkataramana Runkana, P.C.Kapur, B.K.Das, S.K.Ajmani, G.Bose, and M.Choudhary, “An integrated model
for granulation and sintering of iron ore fines at Tata Steel's SP#2,” Presented at International Seminar on
Mineral Processing Technology (MPT-2002), Bangalore (January 2002).
50. Venkataramana Runkana, Kapur, P. C., and Gupta, S. S., “Modelling of granulation of iron ore fines sinter
feed in a continuous industrial drum,” Trends in Beneficiation and Agglomeration of Iron Ore, Presented at 2nd
International Conference on Raw Materials and Sintering (CORAS 2001), Ranchi, India (September 2001),
pp.116-124.
51. Gupta, S. S., and Venkataramana Runkana, “Mathematical model of air flow during iron ore sintering
process,” Presented at Ironmaking Conference, Pittsburgh, USA (March 2000), pp.249-258.
52. Venkataramana Runkana, S.S.Gupta, P.C.Kapur, and N.Ramachandran, “Development of an Integrated
Mathematical Model for Iron Ore Sintering,” Presented at International Conference on Raw Materials and
Sintering, Ranchi, India (September 1997), pp.229-234.
Fly UP